Rolling Tower
$329.00
Sale $299
Item ISBJ
FEATURES
29" width allows the Rolling Scaffold to fit through standard doors
3/4" Plywood Platform
A smooth grip cutout for easy handling, surrounded with a protective
steel edge banding around the plywood.
Platform Height Adjustments
With a convenient locking system, which allows for quick and easy
height adjustment. Trusses can be adjusted to straddle over lower
obstacles.
5" Swivel Double Locking Casters Are Included For Easy
Movement
Caster Have a 220 lbs. capacity rating each with rear foot brake,
locking both the swivel and wheel.
Powder Coat Paint Finish
A powdered pigment is sprayed onto the steel, and seals the finish by
baking in heat generated ovens. The end result is a rust resistant
scaffold product.
18 Feet Maximum Height
Can be stacked up to 3 units high when outriggers are used. Outriggers
are required for use of 2 towers or more.
Rolling Scaffolds meets or exceeds applicable OSHA and ANSI Standards
Optional Accessories
Outriggers
Increase the width of the base tower to prevent tipping, and allows the
tower to reach 18' maximum platform height when you use 3 units stacked on
top of each other. A 4 to 1 height to width ratio is the maximum permitted.
Four outriggers are required.
Outriggers (set of 4) $159.00
Item# ISBJOR
Optional
Outriggers
(Required when stacking 2 or more scaffolds)
Guard Rail System
Designed to stay at the platform level at all times. Easy to install as the
posts and side rails are one piece and end rails allow easy opening for
access to the platform. Federal OSHA regulations require guard rails on
platforms 10' or higher.
Guard Rails (set) $159.00 with toe boards
Item#ISBJGR
All prices are plus shipping
Call Gary at
1-888-973-3768
To Order
Color and construction may vary.
Great for Stairs!
Old angle iron style unit show to illustrate use on stairs
