Reinforcing 10 oz standard fiberglass mesh is made of multi-strand,
interwoven glass fibers. Fibers are coated with resin polymers to enhance
their resistance to attack by alkalinity of mixtures containing Portland
cement.
Storage: Store on end in original manufacturers boxes. Do not
permit prolonged exposure to sun and other elements of weather. Do not
permit contact with petroleum products.
Uses: Reinforcing 10 oz standard fiberglass mesh is embedded into
the base coat of various EIFS systems to enhance structural strength and
impact resistance.
Other Remarks: Approx Size of Roll 38" X 75 Feet (237 1/2 Square
Feet)
The data above are typical results and subject to
change without notice.
The user should take test and do trial-applications on
the above products before coming into application so as
to witness and ensure suitability for user's special purpose and
technique.
888-973-3768
FAX 770-974-2689
Home
-
SW Style Scaffolding Frames -
WR Style Scaffolding Frames -
Masonry Veneer Jacks
Scaffolding Cross Braces -
Scaffolding Screw Jacks
- Scaffolding Casters
- Scaffolding Accessories
- Scaffolding Guard Rails
-
Scaffolding Side Brackets -
Scaffold Boards -
Scaffolding Stair Units
-
Rolling Bakers Scaffold -
Aluminum Scaffolding -
Replacement Studs -
Pump Jack Systems -
Perry Scaffolding -
Perry Drywall Carts -
Step Up Scaffolding
Vault Aluminum Scaffold
- Folding Aluminum Scaffold
- Shoring
Post Guard -
Fiberglass Mesh -
Safety -
Contact Us
Payments, Leasing
COPYRIGHT 2002-2010 SCAFFOLDINGDEPOT.COM
